top of page
Marine2

ACTIVE MOISTURE-REMOVAL TECHNOLOGY™

Saltwater finds a way in. DRYOUT® pulls moisture back out.

Spray, condensation, total immersion — DRYOUT is engineered to pull moisture away from the electronics and safety gear that have to work offshore.

THE REALITY

Underway means exposed, the whole time.

Spray over the bow. Condensation belowdecks overnight. Salt air that never really goes away, even at the dock.

Marine5.jpg

STOWED, NOT SHUT OFF

The clock starts the moment it's stowed.

None of that stops a trip out. But it does start a slow clock on anything electronic aboard — chartplotters, radios, radar — and on the safety equipment stowed away between uses. Passive storage was never built to reverse that; DRYOUT was engineered to pull that moisture away instead.

THE SOURCES

Moisture doesn't need a storm out here either.

Heavy weather is the obvious threat. Most exposure comes from sources that are just part of being on the water.

Spray

Spray

Lake

Submersion

Salt Air

Salt air

Condensation

Condensation

Corrosion

Fungus

Mold / mildew

Corrosion

DRYOUT is engineered to remove moisture underway, at the dock, and in storage over the off-season.

Scuba Diving Gear

WHAT'S AT RISK

Everything aboard is at risk.

Moisture doesn't discriminate between a handheld radio and a full electronics suite at the helm. Once it's trapped, the clock is running either way.

Chartplotter / MFD

Chartplotter/ MFD

Radar Scanner

Radar scanner

Satellite Antenna

Satellite Antenna

Autopilot

Autopilot

Radio

VHF / AIS radio

Battery

Battery / shore power

EPIRB / Personal locator

EPIRB / personal locator

Whatever's aboard, whatever holds it, DRYOUT can be engineered in.

Boat owner removing chartplotter and VHF radio from shrink-wrapped boat into a hard case engineered with DRYOUT

NAVIGATION & COMMS

Navigation and comms can't go dark.

Chartplotters, radar, and VHF radios sit behind sealed housings that are rated for spray — not for the humidity and condensation that build up inside them over a season of use.

  • Condensation forming inside a console panel overnight

  • Humidity trapped during winter storage or haul-out

  • Salt air working on connectors and antenna ports year-round

Marine4.jpg

HANDHELD GPS, EPIRBS & COMMUNICATORS

Emergency electronics only work if they're dry.

A corroded battery contact is the worst possible time to find out.

ON BOARD

The failure happens in storage.

EPIRBs, personal locator beacons, and handheld GPS units are built to sit unused for months at a time — until the one moment they're needed. Battery compartments, antenna seals, and internal circuit boards are exactly the kind of components that corrode quietly in storage, with no warning until the device won't power on.

​Built into the pouch or case that holds them, DRYOUT is engineered to pull that moisture away, giving these devices the best chance of powering on the moment they're needed.

THE MECHANISM

Pulls. Traps. Releases.

Unlike disposable desiccants that saturate, stop working, and need to be thrown away, DRYOUT is designed for repeated use, season after season.

Pull. Trap. Release.

01

PULLS

Engineered to pull moisture away from electronics, connectors, and metal hardware.

Pull. Trap. Release.

02

TRAPS

Holds it in an engineered absorbent core, away from sensitive components.

Pull. Trap. Release.

03

RELEASES

Resets with sunlight, heat, or forced airflow. No power required.

BUILT FOR INTEGRATION

DRYOUT isn't a product. It's what goes inside one.

DRYOUT is an advanced material, built to be engineered into the carry and storage products a brand already makes.

Dry Bags

Dry bags

Deck Packs

Deck packs

Hard Cases

Hard cases

Case Liners
Duffels

Duffels

Case liners

If it stows or carries gear aboard, DRYOUT can be built into it.

Military crew on a rigid inflatable boat with marine electronics and hard case engineered with DRYOUT in sea spray

DUAL PROTECTION

Rescues what's already wet. Prevents what's not yet.

Most moisture solutions do one job. DRYOUT does both. Asset protection and peace of mind, in the same material.

Rescue

RESCUES

If gear gets wet — spray, humidity, or full immersion — DRYOUT is engineered to pull, absorb, and trap that moisture, giving it the best chance of avoiding rust, corrosion, and electrical failure.

Protect

PROTECTS

Built into a case, bag, or console panel, DRYOUT works continuously to pull moisture away from gear — reducing the risk of failure before the next trip out.

PARTNERSHIP

What we do.

DRYOUT partners with leading marine and maritime equipment brands to design, develop, and produce next-generation storage and carry products — bags, cases, and console panels — engineered with DRYOUT technology.

Concept

Concept

Design
Development
Production
Launch

Design

Development

Production

Launch

READY WHEN YOU ARE

Passive was built for storage. Active was engineered for open water.

DRYOUT partners with leading marine and maritime brands to integrate recovery capability into next-generation bags, cases, and equipment — for the exposure that's already part of every trip out.

bottom of page