RESETTING DRYOUT

Hard Case Panel

RESET INSTRUCTIONS

There are multiple sources to reset DRYOUT advanced material for reuse. Please click one of the sources below for detailed instructions based on the source and temperature.

Direct Sunlight

TEMPERATURE

RECOMMENDED RESET TIME

Warm (70°F / 21°C and above)

3 hours

Cool (50–69°F / 10–20.5°C)

4 hours

Cold (33–49°F / 0.5–9°C)

6 hours

Freezing (–20–32°F / –28.9–0°C)

8 hours

Hair Dryer (Low Airflow/Medium Heat)

TEMPERATURE

RECOMMENDED RESET TIME

Warm (70°F / 21°C and above)

30 minutes

Cool (50–69°F / 10–20.5°C)

30 minutes

Cold (33–49°F / 0.5–9°C)

1 hour

Freezing (–20–32°F / –28.9–0°C)

2 hours

Fan-Forced Space Heater (Position 12–18 inches (30–45 cm) from heater.

TEMPERATURE

RECOMMENDED RESET TIME

Warm (70°F / 21°C and above)

1.5 hours

Cool (50–69°F / 10–20.5°C)

2 hours

Cold (33–49°F / 0.5–9°C)

3 hours

Freezing (–20–32°F / –28.9–0°C)

4 hours

Home HVAC Heater Vent

TEMPERATURE

RECOMMENDED RESET TIME

Warm (70°F / 21°C and above)

2 hours

Cool (50–69°F / 10–20.5°C)

3 hours

Cold (33–49°F / 0.5–9°C)

4 hours

Freezing (–20–32°F / –28.9–0°C)

5 hours

Fan-Only Airflow (Dry Air — Less Than 50% Relative Humidity)

TEMPERATURE

RECOMMENDED RESET TIME

Warm (70°F / 21°C and above)

4 hours

Cool (50–69°F / 10–20.5°C)

8 hours

Cold (33–49°F / 0.5–9°C)

Not recommended.

Freezing (–20–32°F / –28.9–0°C)

Not recommended.

Fan-Only Airflow (Humid Air — More Than 50% Relative Humidity)

TEMPERATURE

RECOMMENDED RESET TIME

Warm (70°F / 21°C and above)

6 hours

Cool (50–69°F / 10–20.5°C)

10 hours

Cold (33–49°F / 0.5–9°C)

Not recommended.

Freezing (–20–32°F / –28.9–0°C)

Not recommended.

Conventional Electric Oven

Only use this method if permitted for your specific DRYOUT product.

Oven Instructions

Preheat the oven to 180°F (82°C).
Remove panel from hard case.
Place it on the top rack over:
- a folded cotton towel,
- parchment paper, or
- a silicone baking mat.
Never place the panel directly on a bare metal rack.
Do not allow the panel to contact oven walls or heating elements.

Recommended Reset Time

2 hours